This suite of profiles has been developed especially for
use as a roof lining panel for applications where structural
integrity is essential prior to fixing the outer skin. Available
as standard in a white polyester finish on a substrate of either
Galvanised Steel or Aluzinc, 0.70mm thickness. Other paint systems
available subject to enquiry.
The standard profile, 32/1000LS is shown with swages in the
trough of the profile. For use with certain standing seam systems
the profile can be rolled without swages to avoid interference
with the halters, 32/1000LN. Both versions can be curved if required.
Non-Fragility
This product has been tested in accordance with ARC (M) 001
: 2000 and has been deemed to be non-fragile. See the table below
for further details.
Non-Fragility testing in accordance with
ARC (M) 001:2000
Product Tested : COVERWORLD 32 0.70mm
Steel White Liner
The tests were carried out using a test rig and impactor which
complied with details in the standard. The construction was tested
without seals, because they are likely to give a varying benefit
depending on weather conditions, (dampness), during assembly.
Testing without should give an additional factor of safety in
the result.
An SFS Fastner reference SDL3-L12-T15 5.5x25 was used.
| Test 3 |
Construction: |
32/1000 x 0.70mm Steel Liner with 3 fastners/m, no sidelap
stitchers, 60mm end lap, 30mm edge distance. |
| Impact Position: |
B |
| Result: |
Passed Class B, 2 drops |
| Test 4 |
Construction: |
32/1000 x 0.70mm Steel Liner with 3 fastners/m, no sidelap
stitchers, 60mm end lap, 30mm edge distance. |
| Impact Position: |
A |
| Result: |
Passed Class B, 2 drops |
Conclusion
Coverworld 32x 0.70mm Steel Liners fixed as stated above give
a class B non-fragility class.
Tested April 2000
