Liner Profiles

CL20 Liner Profile

Overview

The CL20 liner profile is our standard liner profile and is supplied as standard in a White Lining Enamel in 0.4mm, 0.5mm and 0.7mm thicknesses. It can also be produced in a range of different finishes and colours to create a soffit sheet. The profile is also available curved to enable it to be used in a twin skin system with a barrel roof or a building with curved eaves.

 

Span Capabilities

In roofing conditions, the span capabilities of the lining panels are largely dependent on the weight of insulation they are required to support. In normal situations, double spanning capabilities of up to 1.8 metres can be achieved.

 

Double Skin Systems

The lining sheet can be used in conjunction with Coverworld roof / wall panels, insulation and spacers to provide a double skin cladding system.

 

Acoustics

To meet the increasing demand for noise reduction in factories and public buildings, Coverworld Lining Sheets can be supplied for specialised acoustic applications, incorporating perforations either the full width of the sheet or just the bottom pan. Perforated lining panels achieve a high degree of acoustic absorbency in comparison with the reflective surface of the plain metal sheeting.

 

Available Colours

Goosewing Grey Lining Enamel (10A05)
White Lining Enamel (RAL9010)

Downloads

Profile Compatibility

Sheet Lengths
Standard:

1.00m - 6.00m

Minimum:

0.70m

Maximum:

6.00m

Additional Services
Crimp Curve:
Non-Drip Backing:
Vented Sheet:
Curving Options
Maximum Sheet Length:

6.00m**

Minimum Internal Radius:

0.30m

Minimum Straight Leg:

0.15m

Self Curving Radius*:

30.00m (Min)

*The self curve radius is meant as a guide only and is not to be taken as definitive, the radius is dependant on material gauge and type, sheet length and purlin spacings all of which can alter this value. ** The maximum sheet length is dependant on the type of curve, please contact the sales office for further clarification.
Available in
 

Plastisol

Polyester

PVDF

Granite HDX

Galvanised

Aluzinc

Aluminium (Mill Finish)

Lining Enamel

0.4mm

 

 

 

 

 

 

 

0.5mm

 

 

 

 

 

0.7mm

 

 

 

0.9mm