Roof Profiles

CR24 Roof Profile

Overview

The CR24 profile is unique to Coverworld and tends to be used as vertical cladding and in particular for soffit sheets.

It has a smaller pitch and shallower profile than our CR32 & CR34 profiles but still gives a full 1.000m cover width.

Given its shallower profile and reduced loading capacity we would not recommend it for use on roofs. This profile is ideally suited for vertical cladding.

Please see the attached data sheet for all relevant load tables.

Available Colours

Goosewing Grey Plastisol (10A05)
Juniper Green Plastisol (12B29)
Merlin Grey Plastisol (18B25)
Olive Green Plastisol (12B27)
Slate Blue Plastisol (18B29)
Vandyke Brown Plastisol (08B29)
Aztec Yellow Plastisol (10E55)
Bamboo Plastisol (08C35)
Black Plastisol (00E53)
Buttermilk Plastisol (10C31)
Cornflower Blue Plastisol (18E53)
Forest Green Plastisol (RAL6002)
Ivory Plastisol (RAL9002)
Jade Green Plastisol (14C37)
Moorland Green Plastisol (12B21)
Mushroom Plastisol (10B19)
Navy Blue Plastisol (RAL5003)
New Grey Plastisol (10B23)
Ocean Blue Plastisol (18C39)
Pacific Blue Plastisol (18E58)
Poppy Red Plastisol (04E53)
Pigeon Grey Plastisol (18B17)
Saffron Yellow Plastisol (08E53)
Terracotta Plastisol (04C39)
Wedgewood Blue Plastisol (18C37)
White Plastisol (00E55)
Willow Plastisol (12B17)
Black Polyester (00E53)
Country Green Polyester
Goosewing Grey Polyester (10A05)
Juniper Green Polyester (12B29)
Merlin Grey Polyester (18B25)
Moorland Green Polyester (12B21)
Mushroom Polyester (10B19)
Olive Green Polyester (12B27)
Oyster Polyester (RAL7035)
Slate Blue Polyester (18B29)
Terracotta Polyester (04C39)
Van Dyke Brown Polyester (08B29)
White Polyester (00E55)
Agate Grey PVDF (RAL7038)
Alaska Grey PVDF (RAL7000)
Bahama Blue PVDF (RAL5015)
Black PVDF (00E53)
Glen Green PVDF (RAL6021)
Metallic Silver PVDF
Mountain Blue PVDF (RAL5014)
Oyster PVDF (RAL7035)
Pinewood Green PVDF (14C39)
Slate Grey PVDF (RAL7012)
White PVDF (RAL9010)
Anthracite HDX (RAL7016)
Grey Aluminium HDX (RAL9007)
Oyster HDX (RAL7035)
Slate Grey HDX (RAL7012)
White Aluminium HDX (RAL9006)
White HDX (RAL9010)
White Lining Enamel (RAL9010)
Aluzinc
Galvanised

Downloads

Profile Compatibility

Sheet Lengths
Standard:

1.00m - 8.00m

Minimum:

0.80m

Maximum:

8.00m

Additional Services
Crimp Curve:
Non-Drip Backing:
Vented Sheet:
Curving Options
Maximum Sheet Length:

6.00m**

Minimum Internal Radius:

0.25m

Minimum Straight Leg:

0.15m

Self Curving Radius*:

35.00m (Min)

Please note that in order to curve this profile it will be run without the purlin bearing leg to create an equal lap (symmetrical) finish. *The self curve radius is meant as a guide only and is not to be taken as definitive, the radius is dependant on material gauge and type, sheet length and purlin spacings all of which can alter this value. ** The maximum sheet length is dependant on the type of curve, please contact the sales office for further clarification.
Available in
 

Plastisol

Polyester

PVDF

Granite HDX

Galvanised

Aluzinc

Aluminium (Mill Finish)

Lining Enamel

0.4mm

 

 

 

 

 

 

 

 

0.5mm

 

 

 

 

 

 

 

 

0.7mm

 

0.9mm