The Eaves Beams we supply are manufactured from prime pre-galvanised steel coil to BS EN 10326.2004 specification giving guaranteed minimum yield strength of 390 N/mm², cut to exact length and suitably packed for UK or export requirements. All the holes are punched at 18mm to suit 16mm diameter bolts.

Material 2.0mm Pre Galv Steel to BS EN 10326.2004
Gauge 2.0mm
Weight (kg/m) 6.66 Kg’s
Area CM² 8.48
Sec Mod XX CM³ 49.55
Sec Mod YYCM³ 13.37
Rad of GYR XX CM 7.91
Rad of GYR YY CM 3.20

Stiffening cleats should be used when side rail supports are suspended from the bottom flange of the eaves beam.

Applied Vertical Loads

Eaves Beam Holes

Span Lat Support Horizontal Wind Loads (kN)
5 6 7 8 9 10 11 12 13 14 15
4.0m 1 22.31 21.61 20.91 20.21 19.51 18.81 18.11 17.41 16.71 16.01 15.31
4.5m 1 19.47 18.77 18.07 17.37 16.67 15.97 15.27 14.57 13.87 13.17 12.47
5.0m 1 16.93 16.23 15.53 14.83 14.13 13.43 12.73 12.03 11.33 10.63 9.93
5.5m 1 14.71 14.01 13.31 12.61 11.91 11.21 10.51 9.81 9.11 8.41 7.71
6.0m 1 12.68 11.98 11.28 10.58 9.88 9.18 8.48 7.78 7.08 6.38 5.68
6.5m 2 11.10 11.10 11.10 11.10 11.10 11.10 11.10 11.10 11.10 11.10 11.10
7.0m 2 9.57 9.57 9.57 9.57 9.57 9.57 9.57 9.57 9.57 9.57 9.57
7.5m 2 8.34 8.34 8.34 8.34 8.34 8.34 8.34 8.34 8.34 8.34 8.34
8.0m 2 7.33 7.33 7.33 7.33 7.33 7.33 7.33 7.33 7.33 7.33 7.33