Typically supplied in white to provide an attractive internal surface to the building and ensuring a high level of light reflectivity. Other colour options may be available – please contact our sales office for confirmation. Available in 0.4 mm, 0.5 mm and 0.7 mm thick options.
For further technical information, please see the download link.
Need help choosing the right profile?
Call us at 01246 858 222 or contact us
Sheets are cut to your specified lengths, subject to the following allowable range:
| Standard sheet length range | 1.0 m to 6.0 m |
| Minimum sheet length* | 0.7 m |
| Maximum sheet length | 6.0 m |
*Any non-standard sheet lengths may incur additional manufacturing, packaging and handling/delivery charges.
CL20 Reverse liner profile can be used to form a fully curved roof or alternatively with curved eaves/ridge.
| Minimum convex self-curve radius | 30.0 m* |
| Minimum crimp curve radius | 0.3 m |
| Maximum length of crimp curved sheet | 6.0 m** |
*The self-curve radius is meant as a guide only as this figure is dependent on material thickness, sheet length and purlin spacings.
** The maximum length of crimp-curved sheets is dependent on the type of curve.
The CL20 Reverse liner profile will be manufactured with a minimum straight leg of 150 mm at each end of the sheet. Please contact our sales office to discuss all curved sheet properties prior to order placement.
To meet the increasing demand for reduced levels of reflected sound within buildings, the CL32 profile liner sheet can be supplied with perforations to the large pan and used together with a dense mineral wool absorbent layer.
The CL32 Liner profile has been developed especially for use in roof lining applications where a class B Non-Fragility rating is required, prior to fixing the outer skin.
The CL20 lining panel is also available in a ‘reverse’ configuration for under purlin applications where the white enamel finish is applied to the opposite face of the regular CL20 profile.
