CR32 Roof Profile

CR32 profile can be installed on suitable steel or timber purlins with a minimum pitch of 4°, after deflection. This is our most commonly used roof profile and can be specified for industrial, commercial and agricultural projects.

Available in the full range of finishes and colours, this profile is also highly adaptable, with non-drip backing and curving both being viable options. Also available with matching wall cladding profile (CW32) and walkable liner profile (CL32).

Suitable for use as a single skin sheet or as the outer weather sheet of a built-up insulated twin-skin system.

Can also be supplied with no swage and equal lap options on request.

For further technical information including load span tables, please see the download link.

Profile Dimensions

70mm 24 1000mm cover width 130mm 32 200mm pitch 18 30 18 32 32mm colour side

Standard Colours

Goosewing Grey
(10A05)

Juniper Green
(12B29)

Merlin Grey
(18B25)

Olive Green
(12B27)

Slate Blue
(18B29)

Van Dyke Brown
(08B29)

View a full range of colours on our ‘Colour & Coatings‘ page >

Need help choosing the right profile?
Call us at 01246 858 222 or contact us

Material Options

MATERIAL0.5mm0.7mm0.9mm
Plastisoltickticktick
Polyesterticktick
PVDFtick
Granite HDXtick
Galvanisedtick
Aluzinctickticktick
Aluminium (Mill Finish)tick

Sheet Lengths

Sheets are cut to your specified lengths, subject to the following allowable range:

0.5mm thick0.7mm thick0.9mm thick
Standard sheet length range1.0 m to 10.0 m1.0 m to 10.0 m1.0 m to 10.0 m
Minimum sheet length*0.7 m0.7 m0.7 m
Maximum sheet length*10.0 m12.0 m**12.0 m**
Maximum unsupported length of sheet0.3 m0.3 m0.3 m

* Any non-standard sheet lengths may incur additional manufacturing, packaging and handling/delivery charges.

** Sheet lengths up to 14.0 m may be possible, depending on full order details. Please discuss with our sales office prior to order placement.

Curving Options

CR32 roof profile can be used to form a fully curved roof or alternatively with curved eaves/ridge.

Curving data as follows:

Minimum convex self-curve radius:40.0 m*
Minimum crimp curve radius:0.3 m
Maximum length of crimp curved sheet:6.0 m**

* The self-curve radius is meant as a guide only as this figure is dependent on material thickness, sheet length and purlin spacings.

** The maximum length of crimp-curved sheets is dependent on the type of curve.

The CR32 roof profile will be manufactured with a minimum straight leg of 150 mm at each end of the sheet and without the side lap support leg to create an equal lap (symmetrical) detail. Please contact our sales office to discuss all curved sheet properties prior to order placement.

Downloads

CR32 Profile Info sheet CR32 Profile CAD Drawing

Other Products

Product thumbnail

C4S Roof Profile

C4S is a unique product to Coverworld, manufactured from Plastisol coated steel, providing an exact match to the old ‘Trafford Tile’ asbestos profile.

Read more